This kit Inclues:
-Front Suspension Kit (1997-2008 C5/C6 Corvette)
---Upper Control Arms with Bushings Installed (2) C5
---Lower Control Arms with Bushings and Ball Joints pressed in (2) C6
---Knuckles With Upper Ball Joings Pressed in (2) C5/C6
---Bearing Hub Assembly(2) C5/C6
---Hub Backing Plates for speed sensor mounting (2) C5/C6
---All associated Nuts, bolts and washers for front suspension are included

-Rear Suspension Kit (1997-2006 C5/C6 Corvette)
---Upper Control Arms with bushings installed (2) C5
---Lower Control Arms with Ball Joints pressed in (2) C6
---Knuckles with Upper Ball Joints pressed in (2) C5/C6
---Left and Right Rear Adjustable Link Assembly (2) C5/C6
---Bearing Hub Assembly (2) C5/C6
---Hub Backing Plates for speed sensor mounting (2) C5/C6
---Parking Brake Shoe Assembly C5/C6
---Parking Brake cable to knuckle Bracket Assembly (2) C5/C6
---All associated Nuts, bolts, fastners and washers for rear suspension are included

-Rear CV Joints (1997-2006 C5/C6 Corvette)
---Outter CV-joints, Boots and hardware, Grease and locknuts, (2 each)

-Emergency Brake Assembly (C6 2005-2008 Corvette)
---Emergency brake lever
---Brake cable to bracket
---Rear cables (2)

-Fuel Delivery (2003-2007 C5/C6 Corvette)
---Left Fuel tank with pump and sending unit
---Right Fuel tank and sending unit
---Fuel tank connector tube crossover
---Fuel Filter

-Cooling System (1997-2004 C5 Corvette)
---Complete Cooling fans assembly
---Radiator
---Radiator Lower rubber isolators
---Coolant overflow tank with cap

-Brakes
--- Rotors, C6 2005-2008, set of 4(will fit 1997-2004 C5)
---Caliper assembly, Set of 4, C5 reads 'Corvette' in raised letters on caliper
----Mounting Brackets
----Slider bolts and boots
----Brake pads
---Banjo Bolts with (8) crush washers for brake line attachment
---Flexible brake lines with mounting bracket(4)
---Bolts and Washers for Caliper to Knuckle (4)

-Miscellaneous
---Vehicle Speed Sensor with mounting bracket
---Brake light switch with plastic holder
---Ignition cylinder, door lock cylinder and 2 key set
---Exterior Door Handles with gaskets
---Exterior rear view mirrors with mounting nuts C6
---License plate lights with bulbs and mounting screws
---Horns with mounting bracket (high and low tones)
---Hood Latches
---Hood release handle and 2 attached cable
---Hood strikers
---Hood Hinges
---Wiper Motor assembly, re-manufactured (motor, arm, 3 screws, and pigtail connector)
---Power window regulator with connector and pigtails
---Seat belts kit (2 pairs), Black hardtop
---Seat belts receptacles (2)
---C5 Steering Column, Tilt (used)

The SMC GTM kit includes all the listed above items for your complete GTM. The final price on the kit is $10,300 plus $300 for the cost of packaging, contact us for a shipping freight quote. And due to the constant increase of GM Parts, please contact us for exact quote as prices change daily.
If you are interested in ordering this kit please call us at (248)276-0483.


-Upgrades (Adders)
---Fuel Pump upgrade, good to 600hp NA - $75
---Fuel Filter/Pressure Regulator, 1999-2004 C5 Corvette - $61
---Rotors, 1997-2004 C5 Drilled and Slotted, GM Performance - $315
---Big Brake upgrade 2006-2007 ZO6 Corvetter Rotors, Calipers and Pads. Upgrade over base kit. (Requires 18 inch rims to clear larger brakes) - $1,995

The items above are upgrades to the base SMC GTM-200 Kit. The price next listed for the upgrades would be added on to the baseline price kit for the upgrade.